Current location:
Homepage
/
/
/
Advantages of using customized non contact pyrometer

News Center

Check category

Advantages of using customized non contact pyrometer

(Summary description)One of the advantages of customized non contact pyrometer is that compared with the previous temperature measurement facilities, it can quickly provide temperature detection and is simple and convenient to use.

Advantages of using customized non contact pyrometer

(Summary description)One of the advantages of customized non contact pyrometer is that compared with the previous temperature measurement facilities, it can quickly provide temperature detection and is simple and convenient to use.

Information

One of the advantages of customized non contact pyrometer is that compared with the previous temperature measurement facilities, it can quickly provide temperature detection and is simple and convenient to use. Within the time of reading a leaking connection point with a thermocouple, it can almost be read with a customized non contact pyrometer The temperature of all connection points. In addition, because the infrared thermometer is solid and light, the portable thermometer is convenient to carry and can be easily put in a leather case when not in use. So you can carry it with you when you are in the factory for inspections and daily inspections.

customized non contact pyrometer

Test accuracy is the biggest feature of the customized non contact pyrometer, and the accuracy is usually within 1 degree. This performance is especially important when you are doing preventive maintenance, such as monitoring severe production conditions and special events that will cause damage or shutdown of the facility. Because most facilities and factories operate continuously for a long time, downtime is equivalent to reducing revenue. To prevent such losses, scan all on-site electronic facilities-circuit breakers, transformers, fuses, switches, buses, and switchboards to find hot spots. Infrared thermometers can quickly detect small changes in operating temperature, and can solve the problem when it is in its infancy, reducing the expenses and the scope of maintenance caused by facility failures.

One of the most assured advantages of customized non contact pyrometer is safety. Unlike contact temperature measurement facilities, infrared thermometers can safely read target temperatures that are inaccessible or inaccessible, and you can read the target temperature within the allowable range. Non-contact temperature detection can also be carried out in areas that are unsafe or difficult to contact temperature measurement, such as near steam valves or heating furnaces. They do not need to run the risk of inadvertently burning their fingers during contact temperature measurement. Accurate detection of the supply/return air temperature of 25 feet above the head is as easy as checking at hand. Infrared thermometers have laser aiming, which is easy to identify the target area.
 

RECOMMEND NEWS

2022
12-02
小黑点

Measuring range of optical pyrometers

When the temperature to be measured is higher than the range that thermocouples can use, and where it is impossible or not suitable for installation of thermocouples, optical pyrometers can generally meet this requirement.
查看详情
2022
11-24
小黑点

What are the characteristics of industrial pyrometers

Pyrometers are available in two forms: 1) A device for measuring the temperature of the molten pool, including: a refractory mounting sleeve and an optical pyrometer;
查看详情
2022
11-17
小黑点

Fluorescent fiber optic temperature transmitter product introduction

Fluorescent optical fiber temperature transmitter is a multi-channel optical fiber temperature measurement device. The temperature measurement channel can be expanded according to the demand,
查看详情
迪凯光电

400-811-6877

Tel:027-8750 9386   027-8750 9105
Add:Dingye building C block, International Enterprise Center, Optics Valley Avenue, Wuhan China  
Fax:027-87745185   
Mail:dkoe@chinadikai.com