Current location:
Homepage
/
/
/
Criteria for choosing a pyrometer

News Center

Check category

Criteria for choosing a pyrometer

(Summary description)The application of the pyrometer is mainly determined by the measurement range. Whether it is the measurement voltage or the initial value of the measurement area, it should be consistent with the requirements of the measurement work.

Criteria for choosing a pyrometer

(Summary description)The application of the pyrometer is mainly determined by the measurement range. Whether it is the measurement voltage or the initial value of the measurement area, it should be consistent with the requirements of the measurement work.

Information

The application of the pyrometer is mainly determined by the measurement range. Whether it is the measurement voltage or the initial value of the measurement area, it should be consistent with the requirements of the measurement work. The larger the measurement voltage is, the smaller the resolution and the poorer the accuracy. , especially when the initial value of the measurement temperature is low, if a larger measurement voltage is selected, the accuracy will be doubled, so it is recommended to choose the smallest possible measurement voltage.

dual wavelength pyrometer manufacturers


The pyrometer model is either a spectral pyrometer or a ratio (two-color) pyrometer. The spectral pyrometer receives the radiant density at one wavelength, unlike the two-color pyrometer with dual sensors and two single sensors, which will measure two different The radiation density of the wavelength, the ratio of the two detector signals reproduces the proportional relationship of the temperature. Due to the intermediary medium such as steam, dust in the radiation of the pyrometer, or the change of the emissivity, to a certain range, the two lines are not connected. Signal changes are displayed. However, the monochromatic spectrum pyrometer will show this change immediately, so the rate pyrometer is preferably used in line-tube converters or in the metal manufacturing and processing industries where radiation interference is more serious.
 

RECOMMEND NEWS

2022
12-02
小黑点

Measuring range of optical pyrometers

When the temperature to be measured is higher than the range that thermocouples can use, and where it is impossible or not suitable for installation of thermocouples, optical pyrometers can generally meet this requirement.
查看详情
2022
11-24
小黑点

What are the characteristics of industrial pyrometers

Pyrometers are available in two forms: 1) A device for measuring the temperature of the molten pool, including: a refractory mounting sleeve and an optical pyrometer;
查看详情
2022
11-17
小黑点

Fluorescent fiber optic temperature transmitter product introduction

Fluorescent optical fiber temperature transmitter is a multi-channel optical fiber temperature measurement device. The temperature measurement channel can be expanded according to the demand,
查看详情
迪凯光电

400-811-6877

Tel:027-8750 9386   027-8750 9105
Add:Dingye building C block, International Enterprise Center, Optics Valley Avenue, Wuhan China  
Fax:027-87745185   
Mail:dkoe@chinadikai.com