Current location:
Homepage
/
/
/
How to care and maintain China infrared pyrometer

News Center

Check category

How to care and maintain China infrared pyrometer

(Summary description)China infrared pyrometer studies have shown that the water-induced reduction in the modulus of epoxy resins is reversible. When the external environment changes and the moisture diffuses out, the film amount of the resin can almost return to its original value.

How to care and maintain China infrared pyrometer

(Summary description)China infrared pyrometer studies have shown that the water-induced reduction in the modulus of epoxy resins is reversible. When the external environment changes and the moisture diffuses out, the film amount of the resin can almost return to its original value.

Information

How to avoid external factors affecting the life of China infrared pyrometer when using China infrared pyrometer products?
Among them, there are mainly three factors, such as light factors, high temperature factors, and humidity factors. The following three factors are briefly interpreted.

China infrared pyrometer
Lighting factor: The structural composition of different products of China infrared pyrometer also has different effects on the intensity of light. For example, those durable materials such as plastics, coatings, etc., these product materials will not produce serious aging when exposed to light. Therefore, it is necessary to analyze what the material composition of the product equipment is.
High temperature factor: When the ambient temperature increases due to high temperature, the intensity of light and the degree of damage will increase. There is no direct chemical reaction between temperature and light, but there is a subtle connection between them. Therefore, when testing programmable China infrared pyrometer products, it is necessary to grasp the precise temperature range.
Moisture factors: China infrared pyrometer Usually, some moisture, rain, dew, etc. are all factors that cause moisture. The dew formed by moisture is the main factor for outdoor moisture, and dew causes more harm than rain because it adheres to Longer time on the material, causing more severe moisture absorption. For example, the wood coating is washed away by rainwater to remove the surface aging layer, and the unaged inner layer is exposed to sunlight, resulting in further aging. In the simulation test of China infrared pyrometer, the damage mechanism of composite materials caused by humid environment has been studied clearly. Taking the diffusion of water to carbon fiber epoxy resin laminates as an example, the aging mechanism of the composite material in humid atmospheric environment is explained.
These three factors are critical to the impact of product equipment, and any one of them can quickly shorten the service life of the thermometer.
China infrared pyrometer studies have shown that the water-induced reduction in the modulus of epoxy resins is reversible. When the external environment changes and the moisture diffuses out, the film amount of the resin can almost return to its original value. However, for many processes of water absorption, the property change caused by water is irreversible. The irreversible changes will lead to a significant decrease in the physical and mechanical properties of the material, and at the same time, the China infrared pyrometer can be programmed to simulate a humid atmospheric environment to detect the anti-aging properties of the material.

RECOMMEND NEWS

2022
09-22
小黑点

The working principle and characteristics of different pyrometers

Thermocouples use this principle to measure temperature. One end that is directly used to measure the temperature of the medium is called the working end,
查看详情
2022
09-20
小黑点

Colorimetric Pyrometer Applications

It is made according to the principle that the ratio of the radiation intensities of the two wavelengths in the radiation emitted by the heated object changes with the actual temperature of the object.
查看详情
2022
09-16
小黑点

The use and classification of various thermometers

Refers to thermometers specially used to measure temperatures over 500°C, including optical thermometers, colorimetric thermometers and radiation thermometers.
查看详情
迪凯光电

400-811-6877

Tel:027-8750 9386   027-8750 9105
Add:Dingye building C block, International Enterprise Center, Optics Valley Avenue, Wuhan China  
Fax:027-87745185   
Mail:dkoe@chinadikai.com