Current location:
Homepage
/
/
/
What aspects should be paid attention to when purchasing an aluminum pyrometer

News Center

Check category

What aspects should be paid attention to when purchasing an aluminum pyrometer

(Summary description)Knowing the temperature range to be measured is an important performance indicator for aluminum pyrometers. Each thermometer has its own specific temperature range.

What aspects should be paid attention to when purchasing an aluminum pyrometer

(Summary description)Knowing the temperature range to be measured is an important performance indicator for aluminum pyrometers. Each thermometer has its own specific temperature range.

Information

1. Knowing the temperature range to be measured is an important performance indicator for aluminum pyrometers. Each thermometer has its own specific temperature range. It is recommended that you choose a suitable two-color thermometer according to your measurement requirements. The range must be accurate and comprehensive, neither too narrow nor too broad. If it is too wide, the temperature measurement accuracy will decrease. The price is too high to be expensive, a bit not worth it. The temperature is too low to meet the requirements. According to the law of blackbody radiation, the change in radiant energy due to temperature exceeds the change in radiant energy due to emissivity error in the short wavelength band of the spectrum. Therefore, when measuring temperature, it is recommended to use short wavelengths whenever possible.

customized aluminum pyrometer

2. Understand the measurement accuracy and minimum resolution. The two are two different concepts that are easy to confuse. Measurement accuracy is an indicator to ensure measurement accuracy, and it is also a key indicator to determine the performance of aluminum pyrometers. Resolution is a small measure when measuring a specific temperature.
3. Know the emissivity. According to customer feedback, measurement errors are often encountered with aluminum pyrometers, 50% of which are caused by emissivity. Applicable to various occasions, the surface material and color of the measured object are different (especially the various pipes in the HVAC system), and its ability to emit infrared energy is also different. By adjusting the emissivity, measurement errors caused by the material can be reduced. So it is very important whether the instrument has this function or not.
 

RECOMMEND NEWS

2022
12-02
小黑点

Measuring range of optical pyrometers

When the temperature to be measured is higher than the range that thermocouples can use, and where it is impossible or not suitable for installation of thermocouples, optical pyrometers can generally meet this requirement.
查看详情
2022
11-24
小黑点

What are the characteristics of industrial pyrometers

Pyrometers are available in two forms: 1) A device for measuring the temperature of the molten pool, including: a refractory mounting sleeve and an optical pyrometer;
查看详情
2022
11-17
小黑点

Fluorescent fiber optic temperature transmitter product introduction

Fluorescent optical fiber temperature transmitter is a multi-channel optical fiber temperature measurement device. The temperature measurement channel can be expanded according to the demand,
查看详情
迪凯光电

400-811-6877

Tel:027-8750 9386   027-8750 9105
Add:Dingye building C block, International Enterprise Center, Optics Valley Avenue, Wuhan China  
Fax:027-87745185   
Mail:dkoe@chinadikai.com