Current location:
Homepage
/
/
/
IT-7 Two-Wire Pyrometer

Products

IT-7 Two-Wire Pyrometer

The highly adaptable IT-7 Two-Wire Pyrometer combines two-wire operation and digital signal processing to simplify connectivity and enable high accuracy. The series with 5 models can measure target temperatures from -25℃~3000℃.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number

Related attachments

Quantity
-
+
Stock:
1
Product description
User guide
       The highly adaptable IT-7 Infrared Pyrometer combines two-wire operation and digital signal processing to simplify connectivity and enable high accuracy. The series with 5 models can measure target temperatures from -25℃~3000℃.
       This IT-7 pyrometer requires two wires - a power supply (16 to 40 Vdc) and a compatible output ( 4-20mA recording or control instrument) to complete the pyrometer system loop. All parts of the instrument are sealed in an aluminum alloy housing (IP65 class), which makes the pyrometer durable and can be used in very harsh environments.
       IT-7 pyrometer is easy to install, to operate and maintain. Its optical system is pre-adjusted and sealed, so there is no need to make any optical adjustment during use. The digital emissivity control allows adjustments in 0.01 increments, and an optional Peak Picker Filter is available to provide smooth temperature indications and outputs when measuring intermittent targets. User can adjust Emissivity, Response time and Peak picker of measurement via the LCD display and buttons inside the sensor. Upon request, all necessary values can be pre-set. 
       The advanced design and functions of IT-7 allow it to meet almost any process requirements.
 
       Technical Data
  Model & Temperature range
       IT-7L1: -25~400°C 
       8-14μm  (glass plastic)
       IT-7L2: 100~600°C 
       2.0-2.6μm  (glass production)
       IT-7L3: 300~1300°C 
       2.0-2.6μm  (glass annealing)
       IT-7H1: 650~1650°C 
       1-1.7μm  (glass annealing)
       IT-7H2: 650~3000°C 
       1-1.7μm  (Float glass production line)   
 
       Measurement parameters
       Accuracy:  ±1%FS / ±0.5%FS
       Repeatability:  0.2%
       Resolution:  0.5 ° C
       Response time: <60ms/ <5ms
       Lens type:  Germanium / double cemented lens
       Detector:  Thermopile / InGaAs
       Measuring distance:  0.28m-∞ / 0.36m-∞ / 0.6m-∞
       Distance-to-Spot Ratio (D:S):  80:1 / 180:1 / 300:1
       Minimum target size:  3mm/ 2mm/ 2mm
 
       Electrical parameters
       Power supply:  24VDC (±20%, 500mA)
       Analog output:  4-20mA
       Digital output:  none
       Power consumption:  <1.2W
       Insulation voltage:  ≤500VAC
 
      Operating parameters
      Operating temperature:  <60 ° C
      Relative humidity:  10-95%, no condensation 
      Size:  Φ96×135mm
      Mechanical shock:  GB/T2423.8-1995
      Thermal shock:  GB/T2423.1, GB/T2423.2
      Anti-interference standard:  JB/T9233.11-1999
 
 
 
We could not find any corresponding parameters, please add them to the properties table

Other products

Previous page
1
2
4
迪凯光电

400-811-6877

Tel:027-8750 9386   027-8750 9105
Add:Dingye building C block, International Enterprise Center, Optics Valley Avenue, Wuhan China  
Fax:027-87745185   
Mail:dkoe@chinadikai.com