Application of customized non contact pyrometer in plastics industry

Non contact pyrometer manufacturers provide various types of infrared thermometers for temperature monitoring in plastic production. These thermometers can quickly and effectively measure the temperature of fast-moving objects. They directly measure the temperature of the product, instead of measuring the temperature of the furnace or drying oven, so that you can quickly adjust the process parameters to ensure product quality.

The non contact pyrometer is easy to integrate into the existing process control system and has the following characteristics:
-Non-destructive-no contact, no pollution to the tested product
-Fast and reliable-continuous, accurate and fast measurement of moving targets
-Flexibility-can measure the temperature of a larger target or a small target area

Main application of customized non contact pyrometer

Blown film compression-Good temperature monitoring combined with proper heating and cooling can ensure the tensile strength and thickness uniformity of the plastic.

Injection molding film compression-control the temperature to maintain the correct film thickness and surface smoothness uniformity, and detect the failure of the die bolt heater or the die bolt.

Biaxial oriented film pressing-A customized non contact pyrometer is installed at the forming cylinder to control the cooling roller and the preheating and cooling equipment is installed to control the heating and cooling capacity.

Sheet material compression-The customized non contact pyrometer allows the operator to monitor the temperature of the sheet material and adjust the temperature of the film heater and cooling drum in time to balance the quality of the production.

Film lamination-The film lamination process of paper, film or metal foil is usually narrow and difficult to measure. When a customized non contact pyrometer is used, the operator can continuously monitor and adjust the film heater and film heater manually or automatically. The temperature of the cooling drum.

Laminating and embossing treatment-Use a customized non contact pyrometer to monitor the temperature of the lateral film layer and control the heater.

Thermoforming treatment-to ensure the correct temperature of the multilayer material stack and the later forming can help monitor the temperature distribution of the material in the correct state before entering the thermoforming machine.