DIT-6H1 Two Color Pyrometer
Number of views:
Product serial number
DIT-6H1 two color pyrometer is a 2 Color infrared pyrometer protected by a NEMA 4 (IP66) rated housing. This pyrometer is ideally suitable for high temperature measurements and a good choice for molten metal, wire and rod forming, vacuum furnaces, induction heating and kiln applications.
DIT-6H1 Two color pyrometer features an advanced electro-optical design, digital electronics and built-in user interface- all combined in a rugged, compact housing. It is ideal for situations where the target may be obstructed by atmospheric smoke or other particulates, where the target is moving, or the target is smaller than the field-of-view. DIT-6H1 two color pyrometer allows user to switch between one-color and two-color mode, which simplifies setup and provides continued measurement flexibility.
DIT-6H1 infrared pyrometer features through-the-lens optical sighting. The optical resolution is 280:1 and the smallest spot size is 2mm. The emissivity is 0.10-1.00 adjustable in 0.01 increments and the slope is 0.850 - 1.150 in 0.001 increments.
DIT-6H1 two color pyrometer has bidirectional RS485 serial communications between the pyrometer in the factory and a personal computer in the control room. This enables remote setup, monitoring and maintenance, especially suitable for installation in hard-to-reach locations.
Model & Temperature range
Distance-to-Spot Ratio (D:S)
Response time(95%): ≤5ms
Temperature resolution(analog): 0.5℃
Temperature resolution(digital): 0.1℃
Output: 0-20mA or 4-20mA or 0-5V
Ambient temperature range: 0-70℃
With air cooling: 120℃
With water cooling: 175℃
Storage temperature range: -20-70℃
Housing: Aluminum alloy
We could not find any corresponding parameters, please add them to the properties table
DIT Two-color Infrared Pyrometer
The DIT Series two color pyrometer is 2 color Pyrometer, can measure target temperature through polluting windows, dust, water or smoke, or when the emissivity of material is unknown. This specific owes to the use of 2 detectors, which measure simultaneously at different spectral ranges and determine the result temperature by forming the radiation ratio.
DIT-6H3 Dual Wavelength Pyrometer
DIT-6H3 dual wavelength pyrometer, temperature range 1000-3000℃, can measure target temperature through polluting windows, dust, water or smoke, or when the emissivity of material is unknown. This specific owes to the use of 2 detectors, which measure simultaneously at different spectral ranges and determine the result temperature by forming the radiation ratio.
DKHIRTL1 Infrared Digital Pyrometer
DKHIRTL1 Infrared Digital Pyrometer is designed to meet high-demanding temperature measuring requirements in many industries, such as hot working in primary and secondary metal processings, safety inspection, petrochemical and power plant operations.
IRPT Infrared Pyrometer
IRPT Series infrared pyrometer includes five models infrared temperature sensor, can measure temperatures from -40℃ to 1650°C. Each model has a specific wavelength and temperature range, suitable for both low temperature (-40~800°C) and high temperature (500~1650°C) monitoring of heating processings.
IT-8 Infrared Pyrometer
IT-8 Infrared Pyrometer is an advanced and integrated online pyrometer, providing a single sensor solution for aluminium extrusion, quenching and strip applications. The series with 4 models can measure target temperatures ranging from 200℃-3000℃.
IT-7 Two-Wire Pyrometer
The highly adaptable IT-7 Two-Wire Pyrometer combines two-wire operation and digital signal processing to simplify connectivity and enable high accuracy. The series with 5 models can measure target temperatures from -25℃~3000℃.
IT-6 Infrared Pyrometer
IT-6 Infrared Pyrometer is an economical and integrated IR pyrometer, providing a single sensor solution for forging, heat treatment, smelting, hot pressing sintering etc.. The series with 5 models can measure target temperatures ranging from -25℃~2500℃.